Induction Hardening in Noida
Precision induction hardening for Noida & Greater Noida’s auto-component, electronics and precision-engineering units — 58–62 HRC with controlled case depth, certified Rockwell reports and bulk-freight logistics from our Ludhiana plant.
Precision. OEM Grade. Certified.
Searching for dependable induction hardening in Noida? Thakur Industries hardens gears, shafts, crankshafts, bearing races and precision components for Noida and Greater Noida manufacturers to 58–62 HRC — selectively heating only the wear surface so cores stay tough and parts stay dimensionally true. Bulk consignments are freighted from your unit to our Ludhiana plant and returned with certified Rockwell reports, giving NCR’s auto-component and precision-engineering shops OEM-grade hardening without an in-house line.
// NOIDA & GREATER NOIDA //
Serving Noida’s Engineering Belt
Noida and Greater Noida sit at the heart of Uttar Pradesh’s industrial corridor, packing three distinct manufacturing ecosystems into one belt. The auto-component cluster across Sectors 57, 63, 80, 81 and the Surajpur–Ecotech zones supplies transmission, engine and chassis parts to two-wheeler and four-wheeler OEMs and their Tier-1 vendors.
Alongside it, Noida’s electronics and hardware base — mobile, appliance and EMS factories — needs hardened jigs, fixtures, pins and precision fasteners. And a deep bench of precision-engineering and tool-room units in Sectors 7, 8, 9 and 10 turns out dies, spindles, cams and machined parts that demand tight surface hardness with zero distortion.
What ties these sectors together is a shared requirement: repeatable, documented surface hardnessthat survives OEM incoming inspection. That is exactly the job work we specialise in.
// COMPONENTS //
Components We Harden for Noida Units
From two-wheeler gearbox parts to precision tool-room work, we cover the full spread of components Noida and Greater Noida manufacturers send out for hardening:
// LOGISTICS //
Noida → Ludhiana, Handled
Our Ludhiana facility sits roughly 330 km from Noida — close enough to run an efficient freight-and-bulk-consignment cycle that keeps per-piece cost low and delivery predictable.
Bulk Consignment Pickup
Batches are collected as bulk consignments from your Noida or Greater Noida unit via our freight network — no need to drop off piece by piece.
~330 km Corridor
A short, well-served highway corridor between NCR and Ludhiana keeps transit fast and freight cost per part minimal on volume lots.
4–6 Day Door-to-Door
Standard turnaround including transit is 4–6 working days; regular clients get fixed collection cycles and priority slots.
// SPECIFICATIONS //
Hardening Specifications
| Surface Hardness | 58–62 HRC (gear & wear surfaces) |
|---|---|
| Shaft / Journal Hardness | 55–60 HRC |
| Case Depth | 0.8 mm – 3.5 mm (controlled to spec) |
| Component Types | Gears, shafts, crankshafts, bearing races, splines, cams, pins |
| Steel Grades | EN8, EN19, EN24, 4140, 20MnCr5, EN36C |
| Heating Temperature | 900–950 °C (induction) |
| Quench Medium | Polymer / water-based, controlled |
| Turnaround | 4–6 working days door-to-door incl. NCR transit |
| Documentation | Rockwell HRC reports, case-depth check, batch traceability |
// WHY NOIDA CHOOSES US //
Why Noida Units Trust Thakur Industries
Consistency
Repeatable 58–62 HRC verified on every batch — no surprises on the assembly line.
Documentation
Full OEM-format Rockwell, case-depth and traceability reports for NCR incoming inspection.
Bulk Capacity
Multi-thousand-piece consignments handled with 25+ years of process scale.
Logistics Sorted
Freight pickup and return built for the ~330 km Noida–Ludhiana corridor.
// PRICING & TURNAROUND //
Rates & Lead Time
We offer competitive job-work rates for both prototype batches and bulk OEM production from Noida. Final pricing depends on component weight, case depth, steel grade and quantity — share your drawing for an exact quote within 24 hours, freight handling included.
Pricing Basis
Per kg or per piece, with reduced rates on bulk and repeat OEM consignments.
Minimum Order
No rigid minimum — trial batches to multi-thousand-piece lots accepted.
Turnaround
Standard 4–6 working days door-to-door; priority slots for regular Noida clients.
// PROCESS //
How Noida Job Work Flows
Drawing & Pickup
Send your drawing, grade and quantity; we quote in 24 hours and schedule a bulk-consignment pickup from your Noida unit.
Precision Hardening
Custom-wound induction coils heat the wear surface at 900–950 °C with controlled polymer quench at our Ludhiana plant.
Test & Return Freight
HRC and case-depth verification, OEM-format documentation, then freight return to Noida — typically 4–6 days door to door.
Related Services & Nearby Cities
Gear Hardening
Transmission Gears
Shaft Hardening
Drive & Output Shafts
Crankshaft Hardening
Engine Components
Case Hardening
Deep-Case Alternative
Induction Heat Treatment Hub
Main Service Pillar
Hardening in Delhi
Nearby City
Hardening in Faridabad
Nearby City
Hardening in Gurugram
Nearby City
Get a Free Quote
Contact Our Team
Induction Hardening in Noida FAQs
Learn more about the metallurgy of surface hardening from the ASM International heat-treatment resources.
Last updated: June 2026 · Thakur Industries, Ludhiana, Punjab
Ready to Harden Your Quality?
Contact us for a free consultation. Send your component details or drawings and get a quick quotation within 24 hours.