Induction Hardening in Dhuri
Certified induction hardening job work for Dhuri’s rice-sheller units, agricultural-implement makers and railway-workshop supply chain — 58–62 HRC with controlled case depth, served from our Ludhiana plant just ~70 km away.
Precision. Certified. Fast Turnaround.
Looking for dependable induction hardening in Dhuri? At Thakur Industries, we provide certified surface-hardening job work for Dhuri’s rice-sheller fabricators, agricultural-implement manufacturers and the railway-workshop supply base — raising wear surfaces to 58–62 HRC while keeping the core tough. From our Ludhiana plant just ~70 km away, we handle everything from a single trial part to bulk production lots, with hardness testing, microhardness traverses and full certification.
// DHURI, SANGRUR DISTRICT //
Built for Dhuri’s Industry
Dhuri is a busy railway-junction town in Sangrur district, where the railway workshop, a dense cluster of rice-sheller and paddy-processing units, and a strong base of agricultural-implement fabricators all run on components that live or die by their surface wear life. That is exactly the problem induction hardening solves.
Rice-sheller huller rollers, emery shaft journals and paddy-separator parts face relentless abrasion from husk and grit. Cultivator tines, thresher beater bars and seed-drill shafts wear at the edges and the bearing seats. Railway-workshop wear plates, lever pins and linkage components must hold tolerance under repeated load. For each of these, we harden only the wear zone — leaving the core ductile so parts resist shock instead of cracking.
Because Dhuri sits roughly 70 km from our Shimlapuri plant along the Ludhiana–Malerkotla–Dhuri road, turnaround stays tight: components are collected, hardened to spec and returned with documentation, usually inside 2–4 working days.
// DHURI COMPONENTS //
What We Harden for Dhuri Units
Rice-Sheller & Paddy
- Huller / sheller rollers
- Emery shaft journals
- Paddy-separator parts
- Rubber-roll shafts
Agricultural Implements
- Cultivator tine points
- Thresher beater bars
- Seed-drill & rotavator shafts
- Chaff-cutter blades
Railway Workshop
- Wear plates & liners
- Lever & linkage pins
- Shaft journals
- Cams & guide rails
Industrial Capabilities
Our Dhuri focus serves the industrial nodes along the Ludhiana–Sangrur corridor, ensuring rapid technical support. Explore our core processes:
Dhuri Support
Helping local rice-sheller, agri-implement and railway-workshop units achieve export-grade surface hardness and documented quality assurance — with collection and return logistics built in.
// SPECIFICATIONS //
Hardening Specifications
| Surface Hardness | 58–62 HRC (wear surface) |
|---|---|
| Case Depth | 0.8 mm – 3.5 mm (controlled to spec) |
| Typical Parts | Sheller rollers, agri-implement edges, railway pins & journals |
| Steel Grades | EN8, EN19, EN24, 4140, 20MnCr5 |
| Heating | Induction, 900–950 °C, selective wear zone |
| Quench Medium | Polymer / water-based, controlled |
| Distance from Plant | ~70 km (Ludhiana → Dhuri) |
| Turnaround | 2–4 working days (incl. transit) |
| Testing | HRC verification, case-depth check, certification |
// WHY DHURI UNITS CHOOSE US //
Why Dhuri Units Trust Thakur Industries
Pickup & Return Logistics
Regular consignment trips on the ~70 km Ludhiana–Dhuri route mean you ship a drawing, not a problem.
Sheller-Wear Expertise
We know how husk and grit chew through huller rollers — and how to harden them to last between rebuilds.
2–4 Day Turnaround
Transit-inclusive lead time keeps your sheller line and implement production moving through the season.
Consistent 58–62 HRC
Repeatable hardness on every batch, verified before dispatch — no guesswork on the shop floor.
Documented Certification
Hardness and case-depth records suitable for railway-grade and OEM supply documentation.
Trial Lots to Bulk
Single prototype parts or multi-thousand-piece agri-implement runs — both welcome, better rates on bulk.
How It Works
From the first WhatsApp drawing to certified delivery back in Dhuri, the process is simple:
- Send your part drawing and quantity — we quote within 24 hours
- Components collected on the next Ludhiana–Dhuri consignment trip
- Selective induction hardening to 58–62 HRC, controlled case depth
- HRC testing, case-depth check and certification on every batch
- Documented parts returned to Dhuri, typically in 2–4 working days
// NEARBY AREAS //
Induction Hardening Near Dhuri
Related Services
Dhuri Hardening FAQs
Learn more about the metallurgy of surface hardening from the ASM International heat-treatment resources.
Last updated: June 2026 · Thakur Industries, Ludhiana, Punjab
Ready to Harden Your Quality?
Contact us for a free consultation. Send your component details or drawings and get a quick quotation within 24 hours.